2013 Dodge Ram Check Fuel Cap P0456

2013 Dodge Ram Check Fuel Cap P0456

Dodge Ram On the 2013 Dodge Ram, when the Check Fuel Cap lights comes on and then is followed by the Check Engine Light, this can mean more than just a loose or faulty Fuel Cap. This can also mean there is a problem somewhere in the EVAP System. First and foremost however, is to check the Fuel Cap. Check the underside of the fuel cap for any cracks or signs of defects. Make sure the cap is seating correctly. If there are any doubts about the inspection of the cap, replace…

Read More

Chip Install: 2009 Dodge Ram 1500 3.7L

Chip Install: 2009 Dodge Ram 1500 3.7L

On the 2009 Dodge Ram 1500 3.7L, the intake air temp sensor is a 2-wire, stand along sensor mounted into the air intake tube near the throttle body. At the IAT Sensor, the wire colors are:   Dark Blue/Light Green = IAT Signal ( + ) Dark Blue/Dark Green – Sensor Ground ( – ) Does your vehicle have a similar problem? Get connected to a Live Q&A session with a certified Auto Mechanic and get your answers on this problem now!

Read More

2004 Dodge Ram 1500 P0441 Purge Solenoid

2004 Dodge Ram 1500 P0441 Purge Solenoid

Dodge Ram 1500 On the 2004 Dodge Ram 1500, there are a couple of things that can set the P0441 code. This can be a problem in the Leak Detection Pump or the EVAP Purge Solenoid. More commonly on these vehicles, the LDP, but both should definitely be tested for proper operation. Carefully inspect the electrical connectors and wire harnesses, looking for any loose, broken or damaged wires. Make sure to carefully inspect the vacuum lines to each for any cracks or holes as a faulty vacuum line can also…

Read More