1996 Toyota Tacoma P1300 Ignition Module

1996 Toyota Tacoma

Toyota Tacoma On the 1996 Toyota Tacoma, the P1300 is a straight forward code pointing to a fault with the Igniter. This is also referred to as the Ignition Control Module. This module is responsible for sending spark at the correct time. So when faulty or intermittent, it can present with the poor idle. Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires. If the visual inspection checks ok, replacing the Igniter should solve the problem. The p0420- this IS the code for a failing…

Read More

1998 Toyota Avalon P1300 Ignition Module

1998 Toyota Avalon

Toyota Avalon On the 1998 Toyota Avalon, the P1300 is pointing to a fault with the Igniter. This is also referred to as an Ignition Control Module. Check the EFI Relay. Inspect the electrical connector and wire harness between the Igniter and the ECM. If the visual inspections check ok, most commonly, the Igniter will need to be replaced. You can find the igniter located on the lower left, rear corner of the engine compartment. Does your vehicle have a similar problem? Get connected to a Live Q&A session with a certified…

Read More