2003 Mercury Sable P0193

2003 Mercury Sable P0193

Mercury Sable On the 2003 Mercury Sable, the P0193 is a fairly straight forward code pointing to a problem with the Fuel Rail Pressure Sensor. The sensor is located on the end of the fuel rail. Carefully inspect the vacuum line for any cracks, holes or disconnections. Inspect the electrical connector for any loose, broken or damaged wires. If no problems are found, check the actual fuel pressure. If the pressure is withing specs, Fuel Rail Pressure Sensor. Does your vehicle have a similar problem? Get connected to a Live…

Read More

2004 Mercury Mountaineer P0193

2004 Mercury Mountaineer P0193

Mercury Mountaineer On the 2004 Mercury Mountaineer with the 4.0L engine,The P0193 is a fairly straight forward code pointing to a problem with the Fuel Rail Pressure Sensor. It’s mounted to the driver’s side fuel rail, towards the front of the rail. Carefully inspect the electrical connector for any loose, broken or damaged wires. Inspect the vacuum line for any cracks, holes or disconnections. If the visual inspection checks ok, replacing the Fuel Rail Pressure Sensor should solve the problem. The fuel rail pressure (FRP) sensor is a diaphragm strain gauge device in…

Read More

2005 Ford Expedition Fuel Rail Sensor

2005 Ford Expedition Fuel Rail Sensor

Ford Expedition On the 2005 Ford Expedition, the P0174 is pointing to a problem with Bank 2 running too lean. The P0193 is pointing to a fault with the Fuel Rail Pressure Sensor. With the FRP Sensor being faulty, there’s a good chance this is the reason Bank 2 is running lean. Inspect the electrical connector to the FRP Sensor and make sure there are no loose, broken or damaged wires. Inspect the vacuum line to the bottom on the FRP Sensor and make sure there are no cracks, holes…

Read More