1999 GMC Safari P1351 Ignition Module

1999 GMC Safari P1351 Ignition Module

GMC Safari On the 1999 GMC Safari, the P1351 is a fairly straight forward code that points to a problem with the Ignition Control Module. The ICM is located on the top, passenger’s side of the engine, just behind the Alternator. Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires. If the inspection checks ok, replacing the Ignition Control Module should solve the problem. Does your vehicle have a similar problem? Get connected to a Live Q&A session with a certified Auto Mechanic and get your…

Read More

1997 Cadillac Deville Ignition Control

1997 Cadillac Deville Ignition Control

Cadillac Deville On the 1997 Cadillac Deville, 4.6L engine, the P1350 is a fairly straight forward code that is pointing to a problem with the Ignition Control Module (ICM). You can fine the ICM located under the ignition coils (the flat metal piece that the coils sit atop – see image below). Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires. If the visual inspection checks ok, replacing the ICM should solve the problem. Does your vehicle have a similar problem? Get connected to…

Read More

1996 Toyota Tacoma P1300 Ignition Module

1996 Toyota Tacoma P1300 Ignition Module

Toyota Tacoma On the 1996 Toyota Tacoma, the P1300 is a straight forward code pointing to a fault with the Igniter. This is also referred to as the Ignition Control Module. This module is responsible for sending spark at the correct time. So when faulty or intermittent, it can present with the poor idle. Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires. If the visual inspection checks ok, replacing the Igniter should solve the problem. The p0420- this IS the code for a failing…

Read More

1992 Oldsmobile 88 Ignition Module

1992 Oldsmobile 88 Ignition Module

Oldsmobile 88 On the 1992 Oldsmobile 88, when there is no spark coming from the coils, even with new coils, this is going to a fault with the Ignition Control Module. This module is the flat part that the Coils plug into/sit on top of. Carefully inspect the electrical connector and wire harness to the ICM for any loose broken or damaged wires. If the visual inspection checks ok, replacing the Ignition Control Module should solve the problem. Does your vehicle have a similar problem? Get connected to a Live…

Read More

1998 Toyota Avalon P1300 Ignition Module

1998 Toyota Avalon P1300 Ignition Module

Toyota Avalon On the 1998 Toyota Avalon, the P1300 is pointing to a fault with the Igniter. This is also referred to as an Ignition Control Module. Check the EFI Relay. Inspect the electrical connector and wire harness between the Igniter and the ECM. If the visual inspections check ok, most commonly, the Igniter will need to be replaced. You can find the igniter located on the lower left, rear corner of the engine compartment. Does your vehicle have a similar problem? Get connected to a Live Q&A session with a certified…

Read More