2010 Honda CRV P0497 P145C

2010 Honda CRV P0497 P145C

Honda CRV On the 2010 Honda CRV, P0497 and P145C codes are directly related. Both of these codes are pointing to the EVAP System low purge flow. When DTC P0497 and P145C are stored at the same time, check for a poor connection, a blockage, or damage at the EVAP canister purge line between the EVAP canister purge valve and the EVAP canister, or check for a stuck closed EVAP Canister Purge Valve. Carefully inspect the electrical connector and wire harness for any loose, broken or damaged wires. If no problems…

Read More

2006 Honda CRV P1454 P0452 P2422

2006 Honda CRV P1454 P0452 P2422

Honda CRV On the 2006 Honda CRV, the P1454 and the P0452 are directly related. Both point to a problem with the Fuel Tank Pressure Sensor. The P2422 points to a problem with the EVAP Canister Vent Shut Valve. Both of these are located under the rear, driver’s side of the vehicle, on the EVAP Canister. Carefully inspect the electrical connectors and wire harnesses to each for any loose, broken or damaged wires. Inspect the vacuum lines for any cracks, holes or disconnections. Inspect the canister itself for any signs of damage….

Read More