Chip Install: 2011 Dodge Charger 3.6L

2011 Dodge Charger

Dodge Charger On the 2011 Dodge Charger, the intake air temp sensor is mounted to the outlet duct of the air cleaner assembly. At the IAT Sensor, the wire colors are: Dark Blue/Light Green = IAT Signal ( + )Brown = Sensor Ground ( – ) Do you have a performance chip to install? Get connected to a Live Q&A session with a certified Auto Mechanic and get the install specs for your vehicle now!

Read More

2010 Chevy Equinox P0442 P0455 EVAP leak

2010 Chevy Equinox

Chevy Equinox On the 2010 Chevy Equinox, the P0442 is a “small” EVAP leak. And the P0455 is a “large” EVAP leak. First and foremost- check the fuel cap. Check the underside of the fuel cap for any cracks or signs of defects that may keep the cap from sealing correctly. If there are any doubts about the inspection of the cap, replace it. Keep in mind, you will need a cap that meets OE Specs. Those “universal” or “locking” fuel caps sold at after market parts stores do not meet OE…

Read More

2007 Toyota Camry C1391 Brake Control

2007 Toyota Camry

Toyota Camry On the 2007 Toyota Camry, the C1391 is “BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: Accumulator Leak Malfunction”. C1391 is stored if a brake fluid, internal or other leak is detected due to improper sealing in the actuator. Internal leakage is suspected if the pump motor operates frequently without braking. There is some testing that will need to be done. The system will need to be tested for any leaks. The Brake Actuator Assembly will need to be tested and inspected. And if these check ok, then next, the Skid…

Read More