2003 Mercury Sable P0193

2003 Mercury Sable P0193

Mercury Sable On the 2003 Mercury Sable, the P0193 is a fairly straight forward code pointing to a problem with the Fuel Rail Pressure Sensor. The sensor is located on the end of the fuel rail. Carefully inspect the vacuum line for any cracks, holes or disconnections. Inspect the electrical connector for any loose, broken or damaged wires. If no problems are found, check the actual fuel pressure. If the pressure is withing specs, replace the fuel rail pressure sensor. Does your vehicle have a similar problem? Get connected to…

Read More

2007 Honda Odyssey P0443 P145C P0497

2007 Honda Odyssey P0443 P145C P0497

Honda Odyssey/span> On the 2007 Honda Odyssey, the P0443, P145C and P0497 codes are related. One is a general purge system code. One is a low purge flow code. And the other points directly to a problem with the EVAP Purge Solenoid. The EVAP Purge Solenoid is located on the top, rear of the engine, towards the driver’s side. Carefully inspect the vacuum lines for any cracks, holes or disconnections (inspect carefully, this is common!). Inspect the electrical connector and wire harness for any loose, broken or damaged wires. If the inspections…

Read More